Mirrors

Features:

• Signature collection
• Recessed single door medicine cabinet
• Available in over 40 frame styles & colors
• Available in 5 sizes:
  • 17" x 26"
  • 17" x 30"
  • 20" x 26"
  • 24" x 30"
  • 24" x 36"
• 0.75" perimeter bevel mirror standard
• 0.37" thick adjustable glass shelves
• Rust proof gray satin anodized aluminum construction
• 3 mirror design (front bevel mirror, mirror behind door and inside mirror back)
• Frame will add to overall dimensions, please see specifications sheet for exact outside dimensions by frame style
• Overall Dimensions: 26 - 36" H X 17 - 24" W

Specifications

• Cabinet measures 4.37" in depth
• With recessed mount, less then 4" go into wall, the frame is completely flush to the wall
• Door has pivot hinge which pivots into cabinet body
• Hinge is securely screwed into the door for ease of removal and remounting the door
• Frame is independent of door and is mounted to the perimeter of cabinet body
• Cabinet can be hinged on either side by rotating cabinet 180° and then repositioning door pull

Options

• Optional 5x magnifying mirror available
• Optional mirrored sides with surface mounting hardware available for surface mounting

Care

• For care use a mild cleanser, applied first to a rag or paper towel
• Do not spray cleaner directly onto the mirror or frame

Installation Instructions:

• For protection during shipping glass shelves are placed inside cabinet body
• They are label marked "GLASS SHELVES", please remove before installation
• Shelf pins are inside the cabinet in an envelope marked "SHELF PINS", remove before installation
• Cabinet body must be level and plumb upon installation
• Use a leveling instrument to ensure accuracy, or door may not close and/or secure itself properly
• When recessing, use the two pre-drilled holes (top and bottom) on each side of the cabinet interior
• Screws are not supplied

Surface Mounting Instructions

• Determine the location of the cabinet on your wall
• Draw a level horizontal line on wall at desired height for top back edge of cabinet
• Line up long thin aluminum strip (holes on the bottom) with horizontal line
• Secure strip with screws (not included). Strip must be well secured
• Insert 2 surface mount hooks (with NO holes) into back slot in the middle on the TOP of cabinet
• Slide one to each extreme (left side and right side)
• Repeat previous step with 2 surface mount hooks (WITH holes) on bottom of cabinet
• Pick up cabinet and hook the 2 Top surface mount hooks into the thin aluminum strip already mounted to the wall
• Secure the 2 Bottom surface mount hooks into the wall with screws (not included)
• Each hook must be to the extreme left and right, and properly secured

• PARTS INCLUDED:
  1 Thin aluminum strip with multiple holes.
  2 Top surface mount hooks - with no holes
  2 Bottom surface mount hooks - with holes

NOTE: If you are mounting the mirrored sides, peel off double-sided tape, align the wood strip to the back of the cabinet - making sure front is flush - and press firmly

For more information on this product please view the specification sheet seen below.

Specification Sheet
Note: Unfortunately, we cannot accept returns for this item. If you have any questions prior to ordering, please contact our trained staff, so that we can ensure that you get exactly what you need.